Page 2 of 2

Re: Stock elderbrock head on stock 4.0

Posted: January 29th, 2018, 1:01 pm
by SkylinesSuck
Dang, that ain't cheap.

Re: Stock elderbrock head on stock 4.0

Posted: January 29th, 2018, 1:02 pm
by Wax
I'm going over to race the world finials in Vegas in October this year I guess I could ship them all back in my crate I send my Jetski in. I was not really wanting to open up the engine to much but I guess I could. Now if only some one made a plug and play ecu that still runs the dash

Re: Stock elderbrock head on stock 4.0

Posted: January 29th, 2018, 1:02 pm
by Wax
I sent you a message in face book russ. No answer as of yet

Re: Stock elderbrock head on stock 4.0

Posted: January 29th, 2018, 8:28 pm
by Russ Pottenger
Wax wrote:I sent you a message in face book russ. No answer as of yet
Sorry, didn't see any notifications on my Facebook.

Shoot me an email at [email protected]
I'll be happy to help you load up your container with Jeep Stroker goodies. :)

Re: Stock elderbrock head on stock 4.0

Posted: January 30th, 2018, 12:33 pm
by SkylinesSuck
If you are already doing a container, I think picking up a crank while you are here would be a must, even if you have no plans to open up the bottom end right now.

Re: Stock elderbrock head on stock 4.0

Posted: January 30th, 2018, 3:09 pm
by BcurpKodiak
I highly recommend the rotating assembly, pistons/rods/crank, from Russ