When to Use Synthetic Oil
Posted: July 25th, 2017, 3:58 pm
I have about 5K kms or 3100 miles on the motor. I have finished with break in oil and decided to throw in some Rotella 15W40 as was recommended.
Well my engine absolutely hates this oil....I accidentally over filled the motor by 1 litre (long story using a measuring container that was british quarts) And about half a day later I noticed it was pushing oil past the rear main, front and out around the filter. Not only that but cold start ups are atrocious! Clak clak clak.
Needles to say its hard to find a conventional with the zddp required, is it too early to switch to semi synthetic? Given availability I have decided on Quaker State High Mileage Defy.
From what I have read its only the initial break in that you shouldn't put it in.
Well my engine absolutely hates this oil....I accidentally over filled the motor by 1 litre (long story using a measuring container that was british quarts) And about half a day later I noticed it was pushing oil past the rear main, front and out around the filter. Not only that but cold start ups are atrocious! Clak clak clak.
Needles to say its hard to find a conventional with the zddp required, is it too early to switch to semi synthetic? Given availability I have decided on Quaker State High Mileage Defy.
From what I have read its only the initial break in that you shouldn't put it in.