Page 1 of 1
Yes or no
Posted: May 4th, 2016, 8:25 am
by amceaglesx4
If pushrods are too long can they destroy all the lifters very quickly ?
Re: Yes or no
Posted: May 4th, 2016, 8:29 am
by nicpaige
yes
Re: Yes or no
Posted: May 4th, 2016, 8:33 am
by amceaglesx4
Hmmm... Now the bonus question ! Do stock lifters oem have more tolerance or travel compared to a sealed power lifter ?
Re: Yes or no
Posted: May 5th, 2016, 4:02 pm
by krom
improperly installed springs, springs not matched to the cam and rockers, will too.
Re: Yes or no
Posted: June 3rd, 2016, 6:27 pm
by SilverXJ
Too long of a pushrod or spring bind can bottom a lifter out.. I don't know about damaging the lifter itself, but it can bend pushrods and other valve components.