Page 1 of 1
Carb'ed Stroker with 470 Truck Avenger what PSI for fuel
Posted: March 29th, 2016, 12:36 pm
by cuban11182
I have a Newcomer Racing Stroker being built and want to see what fuel PSI I will need to make the Holley happy. I've read between 4-7 psi, but thought I'd ask before I start planning on what to do.
Thanks in advance
Re: Carb'ed Stroker with 470 Truck Avenger what PSI for fuel
Posted: March 29th, 2016, 1:35 pm
by jsawduste
Whatever pressure the carb manufacture recommends.
Ultimate fuel/air metering will be determined by the carb jets, springs and adjustments.
Re: Carb'ed Stroker with 470 Truck Avenger what PSI for fuel
Posted: March 29th, 2016, 7:14 pm
by amceaglesx4
Holleys prefer 7 psi. Carter and edelbrock about 5
Re: Carb'ed Stroker with 470 Truck Avenger what PSI for fuel
Posted: March 30th, 2016, 5:53 pm
by amceaglesx4
Honestly you will probably have better throttle response with the 390