Jeep Timing Table

Performance mods and Advanced Stroker discussion.
Post Reply
1scram
Posts: 6
Joined: September 27th, 2011, 5:17 pm
Stroker Displacement: 282
Vehicle Year: 1981
Vehicle Make: jeep
Vehicle Model: cj8

Jeep Timing Table

Post by 1scram »

I have been working on tuning and have built a stock jeep timing table based on "Base + Mech + Vacuum" and thought I would share the information. The table is base on max advance.

Image
xdark
Noob
Noob
Posts: 19
Joined: November 14th, 2015, 9:47 pm
Stroker Displacement: 4.7
Vehicle Year: 1998
Vehicle Make: jeep
Vehicle Model: wrangler

Re: Jeep Timing Table

Post by xdark »

Ive been running the AEM F/IC 6 piggyback for a few weeks now . its not too bad . im surprised no body is interested in fuel maps and ignition timing.
Brammudje
Posts: 2
Joined: January 18th, 2015, 10:18 am
Stroker Displacement: 4,7
Vehicle Year: 1984
Vehicle Make: Jeep
Vehicle Model: CJ7
Location: Eindhoven (NL)

Re: Jeep Timing Table

Post by Brammudje »

Thanks!
stroked'73
Making Progress
Making Progress
Posts: 79
Joined: March 30th, 2008, 1:35 pm
Stroker Displacement: 4.6L
Vehicle Year: 1973
Vehicle Make: Jeep
Vehicle Model: Wagoneer
Location: Montpelier, Vermont

Re: Jeep Timing Table

Post by stroked'73 »

I 've been using your table to get a kindof baseline for my carbureted / vacuum distributor setup. I know there's so many variables like CR's and such, but do you think the info in your table is transferable to a non-efi/computer controlled setup?

I too have looked pretty hard for timing info for these strokers and have come up empty. Maybe cause the ECM's do all the thinking and adjusting?
Anyway, I was stoked to find your table last year and appreciate you sharing it. Saw that it was ressurected so I thought I'd ask!
:cheers:
1973 Jeep Wagoneer - 4.6L basic stroker, Q-jet/Offy dualport, Comp 68-231, .043" HG, 9.79 scr/8.56 dcr, crappy quench
Tucker.dt
Posts: 1
Joined: May 12th, 2022, 7:49 pm
Stroker Displacement: 4.6
Vehicle Year: 1982
Vehicle Make: Jeep
Vehicle Model: Cj7

Re: Jeep Timing Table

Post by Tucker.dt »

1scram wrote: August 11th, 2015, 1:59 pm I have been working on tuning and have built a stock jeep timing table based on "Base + Mech + Vacuum" and thought I would share the information. The table is base on max advance.

Image
Where can I see the table.
Brianj5600
I think I'll order a "tab"
I think I'll order a "tab"
Posts: 43
Joined: August 23rd, 2019, 10:49 am
Stroker Displacement: 4.7
Vehicle Year: 2004
Vehicle Make: Jeep
Vehicle Model: Wrangler

Re: Jeep Timing Table

Post by Brianj5600 »

Load is in torr. You will have to convert to kPa, Psi, etc.

Stock timing in my 2004 TJ.
stocktiming.png
What I run with my 2004 TJ.
timing.png
You do not have the required permissions to view the files attached to this post.
User avatar
darkcorp
I made it to triple digits!
I made it to triple digits!
Posts: 101
Joined: November 14th, 2013, 12:21 am
Stroker Displacement: 4.6L
Vehicle Year: 1999
Vehicle Make: JEEP
Vehicle Model: GCh 4.0
Location: Kazan/Russia
Contact:

Re: Jeep Timing Table

Post by darkcorp »

Brianj5600, thanks a lot!
What is torr?
User avatar
Cheromaniac
I live here
I live here
Posts: 3179
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: Jeep Timing Table

Post by Cheromaniac »

darkcorp wrote: September 7th, 2022, 7:35 amWhat is torr?
Wikipedia is your friend:

https://en.m.wikipedia.org/wiki/Torr#:~ ... 3.32%20Pa).
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car :mrgreen:
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests