Jeep Strokers

ok everything begin in fall 2013, i begin to search for a supercharge......... i always had a look on the Avengers, but i found also some adapter to install MP90. My first try was to found a used Avengers, because, it a bolt on, a probably picking a good existing setup.

in spring 2014 i found one from a 2003, come with 2 computer, 2 pulley, 2 set of injectors....so a lot of part to be able to found the right setup.

between spring 2014 and spring 2015, i search for add on, for tuner, for answer to be ready !

in february, i begin to mount the setup on a dummy 4.0L

i put the SC, a JBA headers, i ceramic coated (vht) a OEM intake i have in stock

after that, i prepare my Jeep block to receive it.

i do a intake exhaust matching, change the TH housing, make a custom downpipe without cat, 02, and with wideband port.

and the build continue !

and continue ....

and the finish touch !!

U-BIT airaid kit

What controller are you using? DiabloSport? How much can you change with it?

some Dyno improvement

some graph of satherday

green line is mine, with the actual setup
4.0L, 6 speed, 4.88 37" tire

the red one, a Sprintex in a 2006 Rubicon with manufacturer tune
4.0L, 6 speed, 4.10 36" tire

jeepxj3 wrote:What controller are you using? DiabloSport? How much can you change with it?

my tuner use CMR thru Diablo T1000

change, probably my tuner will come here answer it. i built the jeep, bought the part, but the tuning part was left to one of my friend.