Page 1 of 1
stroker timing low power
Posted: May 19th, 2015, 7:39 pm
by pete
Just installed a atk stroker in my 90 cherokee. Power does not feel more Than old stock motor.
Timing mark on balancer is 12 degrees at idle. Any suggestions? Please help!
Re: stroker timing low power
Posted: May 20th, 2015, 6:10 pm
by bigal389
Before anyone can help you out they will probably need the details of your build. I'm not up on the renix or I would try. Also you may want to post this over in the Stoker Basics forum
Al
Re: stroker timing low power
Posted: May 21st, 2015, 6:30 am
by cruiser54
pete wrote:Just installed a atk stroker in my 90 cherokee. Power does not feel more Than old stock motor.
Timing mark on balancer is 12 degrees at idle. Any suggestions? Please help!
The distributor needs to be indexed properly.
Click on the pink link below and perform the procedure described in Tip 13.