Jeep Strokers

Hi folks,
My name is Dale and I have a small machine shop in San Antonio, TX.
I'll confess, I don't have a stroker or even a Jeep, but was turned on to this site by a couple members.
Always looking for ideas for new products so let me know if there is a common problem or component you continually need.
I am a member on several forums but came from the rock crawling world.
Here is before and after pics of my rig. I did all the work myself in my small garage, but I had to use the welder at work for the custom Hummer wheels because of so much welding.





Dale

hey dott glad to see you made it over here. let me know if i can help with the plate setup. could probably just ship you mine to copy

I still have that 4.7L throttle body with the stock plate. All I need is the other plate to do the mod.
Ultimately, I want to form a replacement part that can be welded to the throttle shaft, without cutting and pasting 2 parts together.

let me see if i still have a 4.0 throttlebody left over. i had several at 1 point but no idea where they are

Link to my ebay store. If the item isn't listed then it is temporarily out of stock.
http://stores.ebay.com/TDS-Aluminum-Pro ... 7675.l2563


Any member of Jeep Strokers is eligible for a 10% discount by going around eBay.
1 requirement, PLEASE, use the PM system here so I know you're a member.

You still have the protection of paying by PayPal, but I can offer the kit for $78.00 - $6.00 = $72.00 by saving the 10% eBay fees.
Free shipping still applies.

Thanks, y'all.

More "eBay bypassing" deals...
I had to correct these prices because I can't discount shipping, which is included in the price.


Dana 300 Cover
Jeep Strokers Member pricing - $81.00 - $6.00 = $75.00 shipped!

Link to my ebay store. If the item isn't listed then it is temporarily out of stock.
http://stores.ebay.com/TDS-Aluminum-Pro ... 7675.l2563

please delete

2 different versions below....
With this cover, you can drill and tap for temperature sensors or attach any other stuff.

Blank PTO Cover - SAE version - Uses 3/8" bolts
This fits all PTO openings with standard threads.
Jeep Strokers Member pricing - $42.00 - $4.00 = $38.00 shipped!

Blank PTO Cover - METRIC version - Uses M10 bolts
This fits PTO openings with metric bolts, Getrag G56 for example.
Jeep Strokers Member pricing - $43.00 - $4.00 = $39.00 shipped!

Link to my ebay store. If the item isn't listed then it is temporarily out of stock.
http://stores.ebay.com/TDS-Aluminum-Pro ... 7675.l2563

Remote Hydroboost Mounting Kit
Jeep Strokers Member pricing - $190.00 - $10.00 = $180.00 shipped!

Link to my ebay store. If the item isn't listed then it is temporarily out of stock.
http://stores.ebay.com/TDS-Aluminum-Pro ... 7675.l2563

please delete

I'd just like to say you make very nice items. I've sent a few people your way to buy the 4.7 adapters.

FlyinRyan wrote:I'd just like to say you make very nice items. I've sent a few people your way to buy the 4.7 adapters.

Thank you, Ryan.
I appreciate your support.
Please let me know any feedback.
I want the products to perform like a custom part should.
My business was started because I hate "universal" parts that don't really fit anything properly.

I am always willing to look at new ideas and see if they could become products.

Dale
210-364-3713

That is one sharp looking adapter with everything thought out. Great price too.

SilverXJ wrote:That is one sharp looking adapter with everything thought out. Great price too.

Thanks, that's funny because originally it was going to be just a flat square plate.

Fuel Filter Adapter uses spin on filters
Jeep Strokers Member pricing - $57.00 - $4.00 = $53.00 shipped!
There are mounting holes on both ends depending on which direction you want it to flow.

Link to my ebay store. If the item isn't listed then it is temporarily out of stock.
http://stores.ebay.com/TDS-Aluminum-Pro ... 7675.l2563