Page 1 of 1
High Idle
Posted: July 5th, 2014, 1:15 pm
by jdobbs
I bored out my throttle and now it has a high idle and a loud whistle. Is there a fix for this?
Re: High Idle
Posted: July 5th, 2014, 4:16 pm
by SilverXJ
How exactly did you bore it out?
Re: High Idle
Posted: July 5th, 2014, 6:14 pm
by jdobbs
I ground out the extra aluminum to the gasket opening size
Re: High Idle
Posted: July 5th, 2014, 6:30 pm
by SilverXJ
Did you grind all the way through?
Re: High Idle
Posted: July 5th, 2014, 8:27 pm
by jdobbs
No it is just a little more then flush with the opening above the butterfly
Re: High Idle
Posted: July 6th, 2014, 6:22 am
by SilverXJ
You might want to check that you didn't actually go into where the throttle plate sits.
You obviously have a leak some place so check everything you took off. Gasket, IAC, MAP sensor, TPS, any hose you had to remove, etc.