Mopar Spring P5249464 Alternatives
Posted: April 16th, 2014, 11:29 am
I replaced the cam on my stock 2005 4.0L.
Long story short, after the synchronizer gear wore out the teeth on my stock cam I replaced it with comp cams 68-232-4 cam.
With intake valve lift of 0.46 and exhaust lift of 0.476.
The plan was to use the mopar springs PN P5249464. However everywhere I turn seems to have them back ordered. Originally they were supposed to be shipping today or tomorrow, however they have been pushed back another month at the earliest it seems.
I am trying to figure out if a different combo of springs, lifters, rods etc. will work. Or if at this point just take the head to a machine shop and call it a day.
The only thing done to the motor is the cam at this point. Any help would be greatly appreciated.
Thanks
Long story short, after the synchronizer gear wore out the teeth on my stock cam I replaced it with comp cams 68-232-4 cam.
With intake valve lift of 0.46 and exhaust lift of 0.476.
The plan was to use the mopar springs PN P5249464. However everywhere I turn seems to have them back ordered. Originally they were supposed to be shipping today or tomorrow, however they have been pushed back another month at the earliest it seems.
I am trying to figure out if a different combo of springs, lifters, rods etc. will work. Or if at this point just take the head to a machine shop and call it a day.
The only thing done to the motor is the cam at this point. Any help would be greatly appreciated.
Thanks