Page 1 of 1
2001 stroker project
Posted: March 25th, 2014, 8:10 pm
by Xj01
Hey guys, looking to start a stroker project! Couple question for u all.. Which is the best 4.2 crankshaft to use? Second question my current jeep is a 2001 cherokee, and I have a spare 1998-1999 block from cherokee Xj mail jeep. Will all my stuff off of my 2001 XJ work on this block? Or should I use my current block? Thanks
Re: 2001 stroker project
Posted: March 26th, 2014, 5:15 am
by jeepxj3
The '99 and '01 blocks have a cam retainer plate and '99+ cam and are different than the '98 which uses a pin/spring and '98 down cam..
Re: 2001 stroker project
Posted: March 22nd, 2015, 8:02 pm
by beiwulf
Good day to you and welcome to Jeep Strokers web page.
other then searching this site for information other sites that you might find useful for your questions.
http://jeep-xj.info
http://www.jeep4.0performance.4mg.com
http://www.kelleyswip.com/index.html
http://www.angelfire.com/my/fan/stroker.html
Depending on your desires -uses vary as do opinions- from the 4 CW stroker crank to the older 12 CW crank. This site is a great resource utilized the search tool to find out based on your goals.
/ciao
Brian