Jeff from Leigh Performance Machine

Off topic, play nice. No Nudity, Pornographic material etc..
Post Reply
jsawduste
My keyboard is getting warn out
My keyboard is getting warn out
Posts: 1032
Joined: February 28th, 2008, 3:13 am
Stroker Displacement: 4.9
Location: Michigan

Jeff from Leigh Performance Machine

Post by jsawduste »

http://www.strokedjeep.com/

Just a shout that Jeff is continuing to do excellent customer service. I have one of his 63mm TB`s from 06/07. Played around with drilling the throttle plate for an air bleed and went a bit to far in the size. Jeff helped me to do a temporary block till I could send him my TB for a replacement plate. I understand he hand fits the plates to each and every TB.

New plate at a fair price with quick turn around. Can`t ask for more.

Now 7/64th`s (.1094 right between #35/36 bit) seems to be the sweet spot for my combo. Without the airbleed the engine would load up a bit on coast down sometimes to the point of stalling. The IAC just doesn't react fast enough. Now all is good and no more loading up/stalling.

Thanks Jeff !!
User avatar
cruiser54
Donator
Donator
Posts: 204
Joined: November 3rd, 2009, 4:38 pm
Stroker Displacement: 4.6
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Comanche
Contact:

Re: Jeff from Leigh Performance Machine

Post by cruiser54 »

He's a heck of a good guy IMHO.
Cruiser's Mostly Renix Tips can be found here :
www.cruiser54.com
Wanna view my technical photos? WARNING: Renix heavy!!
http://www.cherokeeforum.com/g/album/1725214
beiwulf
Donator
Donator
Posts: 204
Joined: September 18th, 2013, 11:18 am
Stroker Displacement: 4.7Turbo soonish
Vehicle Year: 1995
Vehicle Make: ZJ
Vehicle Model: Laredo
Location: So.Cal

Re: Jeff from Leigh Performance Machine

Post by beiwulf »

I use and appreciate his work as well. Good communication.

Thanks again Jeff
95 Silver ZJ 4x4 4.0L (soon to be stroked/boosted) currently DD
1999 Victory V92 (first year production) street bike/cruiser

95 ZJ Turbo Boosted Stroker build threadhttp://www.jeepstrokers.com/forum/viewt ... f=8&t=4342
Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests