Page 1 of 1
won`t rev over 2000rpm`s
Posted: October 2nd, 2013, 7:53 am
by rocket1
I have a 4.9stroker w/700r4 going in 92 yj it has 04 intake ,3.5 lhs fuel reg.,27pound inj.,k&n ,cps relocator(avance adapters) idles great & runs great up to 2000rpms(seems to hit rev limiter) no codes on computer 49psi on fuel rail any ideas? thanks for any help
Re: won`t rev over 2000rpm`s
Posted: October 2nd, 2013, 10:51 am
by Cheromaniac
rocket1 wrote:any ideas?
Possibly a plugged up cat. Bang on it with your fist and if it rattles like a can of marbles, replace it.
Re: won`t rev over 2000rpm`s
Posted: October 3rd, 2013, 1:59 am
by rocket1
no cat
Re: won`t rev over 2000rpm`s
Posted: October 3rd, 2013, 8:28 am
by turbojeeper
Check your gap between crank sensor and wheel. Could be losing the signal at that rpm if it's not close enough. Also is this Just free reving or driving. Or both
Re: won`t rev over 2000rpm`s
Posted: October 3rd, 2013, 10:18 am
by rocket1
@turbo its doing it both driving & not .avance adapters said you can gap with a credit card so thats how I did it but thats one of my first thoughts just won`t have time to pull tranny til the weekend plus I was hoping that isn`t it.does the wheel /marks need to be shined up to read it was a junk yard find? thanks
Re: won`t rev over 2000rpm`s
Posted: January 20th, 2014, 9:19 am
by rocket1
computer was the problem. thanks