Jeep Strokers

Can someone run my setup on Desktop Dyno and tell me what it should make?
98 Block +.060 over
Short rods
7120 head with 68cc chambers and mild porting, stock valve size
.043 gasket
.045 quench
15cc piston dish
Mopar 229 cam
62mm TB and 24lb injectors
after market header with stock exhaust
99+ intake
and a 4.7 badge on the tailgate...

Ditch the 62mm TB , tune the PCM, and enjoy.....

FlyinRyan wrote:Ditch the 62mm TB

Why? Weren't you recommending larger throttle bodies?

I should have been clearer. 62 is not nearly enough.

Thanks, what TB size would work best then and where can I source it? And what can I expect out of a 62? 240-250-260? I forgot to mention I am at 2800 ft alt.