Page 1 of 1
4.0 with v-belts
Posted: May 31st, 2013, 8:13 am
by matty401
putting a 4.0 in my son's 77 hornet wagon what balancer do you use to keep the v-belt drive
Re: 4.0 with v-belts
Posted: May 31st, 2013, 11:02 pm
by IH 392
The one that was on the 258 you pulled out.
Re: 4.0 with v-belts
Posted: June 1st, 2013, 12:54 am
by matty401
the motor coming out is a 232
Re: 4.0 with v-belts
Posted: June 1st, 2013, 8:02 am
by IH 392
Ok, use the one off of the 232 you're taking out, the earlier crank should have the "long" snout and the 4.0 will have the "short" snout, it'll be ok, torque the bolt to speck and it wont come off.
Re: 4.0 with v-belts
Posted: June 2nd, 2013, 6:47 am
by matty401
thanks for the info