Jeep Strokers

I saw that Ford 302 roller rockers appear to have the same specs as the Harland Sharpes but cost much less. Anybody looked into this?

http://www.summitracing.com/parts/scc-scp1021bl

http://www.summitracing.com/parts/scc-scp1021bl-1

http://www.summitracing.com/parts/csp-s40196

See these links:
http://www.naxja.org/forum/showthread.p ... 738&page=2
http://members.tripod.com/~Mojo_Page/Rokr1.htm
http://www.jeepstrokers.com/forum/viewt ... 32&start=0


The conclusion is once you figure in the machining, extra parts, etc it isn't cost effective.

Thanks for the links.