Need quench help!
Posted: November 28th, 2012, 12:13 am
My plans are to build a mini stroker and here is what I have so far. 93 4.0 bored .03093 7120 head. Upgraded valve springs moly retainers. I have a set of speed pro hypereutectics and moly rings for it. I am following the "wilder mini stroker" recipe except for the bore size and pistons. I need some info on which 232 crank to use. I would prefer one that didn't require any snout work. Also I am calculating a -.014 deck clearance and need to find the thickest gasket possible. I was told that the felpro 530sd was .052 compressed can someone verify this? That would set my quench at .038 would that be alrite? My scr should've 9.75:1 ish. Thanks!