Jeep Strokers

Can someone please help. I am having a harmonic damper built.

I need the Crankshaft Nose Dimension for a stock 4.0 crank. That is, the diameter of the front of the crank where the damper bolts onto.

Also the inside diameter of the harmonic balancer/damper where it bolts onto the crank.

Need the measurement to 4 places. example 1.xxxx

Thanks.

Why not go measure your own?

SilverXJ wrote:Why not go measure your own?

All bolted on the engine.

Take the harmonic balancer off and measure away.

I would but the Jeep is not home, I am at work, it is snowing outside. I want to do the removal and install only once.

CobraMarty wrote:I need the Crankshaft Nose Dimension for a stock 4.0 crank. That is, the diameter of the front of the crank where the damper bolts onto.

Need the measurement to 4 places. example 1.xxxx

It's 1.1250" or 1-1/8".

Thank you.