Becoming a vendor?

Check here for most things forum related... NOT stroker related!
Post Reply
FlyinRyan
I made it to triple digits!
I made it to triple digits!
Posts: 157
Joined: October 5th, 2012, 9:00 pm
Location: Houston area, Texas
Contact:

Becoming a vendor?

Post by FlyinRyan »

Hi there...was curious about the process of becoming a vendor here. I do PCM tuning for OBDII Chrysler vehicles and specialize in Jeeps. I have done multiple 4.6 strokers from mild to wild with great results. Not looking to spam up the board with advertising, but I feel I have something to offer to a often overlooked community.

Thanks
Ryan
Flyin' Ryan Performance
User avatar
SilverXJ
Global Moderator
Global Moderator
Posts: 5789
Joined: February 14th, 2008, 7:14 am
Stroker Displacement: 4.6L
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Radford, Va

Re: Becoming a vendor?

Post by SilverXJ »

We don't really have a vendor status yet. I would PM Muad'Dib about it though. It has never come up before.
FlyinRyan
I made it to triple digits!
I made it to triple digits!
Posts: 157
Joined: October 5th, 2012, 9:00 pm
Location: Houston area, Texas
Contact:

Re: Becoming a vendor?

Post by FlyinRyan »

SilverXJ wrote:We don't really have a vendor status yet. I would PM Muad'Dib about it though. It has never come up before.
Done. I don't mind keeping it casual , I'd be happy to make a donation to the site :wiggle:
Flyin' Ryan Performance
User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1497
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Becoming a vendor?

Post by Muad'Dib »

Nothing special about becoming a vendor.. just make a post in the vendor section and explain your services etc.

http://www.jeepstrokers.com/forum/viewforum.php?f=21

As always donations are extremely appreciated!
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests