Finally made it to the track
-
- I made it to triple digits!
- Posts: 151
- Joined: November 2nd, 2010, 9:20 am
- Stroker Displacement: 4.0
- Vehicle Year: 1999
- Vehicle Make: Jeep
- Vehicle Model: XJ
Finally made it to the track
I dont really know if this is the right place for this, but I finally got a run in.
now some big things to consider first.
#1 never ran at the track before. (which I think makes a huge difference,its pretty different)
#2 OPEN rear diff on old all season 235s.
#3 In 2wd despite it being a heavier 4wd
#4 basically full leather interior
#5 drivetrain is STOCK. stock long block 4.0L, stock aw4 trans, stock 242 tcase in 2wd, stock OPEN 8.25 rear with 3.55s
#6 170k mile stock front and rear suspension.
#7 running VERY rich.
I believe she has a lot more to give. mainly traction oriented.
Left lane: car 4.0L
now some big things to consider first.
#1 never ran at the track before. (which I think makes a huge difference,its pretty different)
#2 OPEN rear diff on old all season 235s.
#3 In 2wd despite it being a heavier 4wd
#4 basically full leather interior
#5 drivetrain is STOCK. stock long block 4.0L, stock aw4 trans, stock 242 tcase in 2wd, stock OPEN 8.25 rear with 3.55s
#6 170k mile stock front and rear suspension.
#7 running VERY rich.
I believe she has a lot more to give. mainly traction oriented.
Left lane: car 4.0L
You do not have the required permissions to view the files attached to this post.
-
- I made it to triple digits!
- Posts: 151
- Joined: November 2nd, 2010, 9:20 am
- Stroker Displacement: 4.0
- Vehicle Year: 1999
- Vehicle Make: Jeep
- Vehicle Model: XJ
Re: Finally made it to the track
build thread is in my sig, but forgot to tell ya its a daily driven 97 cherokee.
You do not have the required permissions to view the files attached to this post.
- Cheromaniac
- I live here
- Posts: 3180
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
- Contact:
Re: Finally made it to the track
Are you sure you've posted the correct timeslip? A 13.64 @ 100.0 1/4 mile run is far too good to be true for a stockish automatic XJ. That's close to the 13.55 @ 105.3 that I ran in my modified 1995 Mustang GT automatic.
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
-
- I made it to triple digits!
- Posts: 151
- Joined: November 2nd, 2010, 9:20 am
- Stroker Displacement: 4.0
- Vehicle Year: 1999
- Vehicle Make: Jeep
- Vehicle Model: XJ
Re: Finally made it to the track
im most proud of my 1.9 60ft the ET has a lot left to give, with traction and all
http://www.streetfire.net/video/cheroke ... 394442.htm
http://www.streetfire.net/video/cheroke ... 394442.htm
- doublins
- I made it to triple digits!
- Posts: 129
- Joined: January 20th, 2010, 11:21 am
- Stroker Displacement: 5.2L V8 (was 4.7L)
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Crofton, MD
Re: Finally made it to the track
I´m pretty sure the numbers from the right lane car are more in line with what to expect from a stock cherokee? the 16.0 @ 92?
-
- I made it to triple digits!
- Posts: 151
- Joined: November 2nd, 2010, 9:20 am
- Stroker Displacement: 4.0
- Vehicle Year: 1999
- Vehicle Make: Jeep
- Vehicle Model: XJ
Re: Finally made it to the track
Did you click my link???^^^^^^^^^^^^
how bout here again
>>>>>>>>>>http://www.streetfire.net/video/cheroke ... 394442.htm<<<<<<<<<<<
how bout here again
>>>>>>>>>>http://www.streetfire.net/video/cheroke ... 394442.htm<<<<<<<<<<<
-
- I made it to triple digits!
- Posts: 141
- Joined: February 28th, 2012, 6:31 pm
- Stroker Displacement: 4.7
- Vehicle Year: 1999
- Vehicle Make: jeep
- Vehicle Model: WJ
Re: Finally made it to the track
Nice build, 13's on a stock 4.0 not without a bottle of happy gas
Whats that Jeep weigh in at?
Whats that Jeep weigh in at?
- Cheromaniac
- I live here
- Posts: 3180
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
- Contact:
Re: Finally made it to the track
But with a blower instead.superstingray77 wrote:Nice build, 13's on a stock 4.0 not without a bottle of happy gas
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
-
- I made it to triple digits!
- Posts: 141
- Joined: February 28th, 2012, 6:31 pm
- Stroker Displacement: 4.7
- Vehicle Year: 1999
- Vehicle Make: jeep
- Vehicle Model: WJ
Re: Finally made it to the track
I would have loved to see that Dual TB intake in action!! Too bad a Hydroboost for the brakes could not have been fit in place of the booster to achieve the clearance. I was thinking the dual TB deal when I was putting mine together again a few weeks ago. With the high lift cam ported head etc, i have a bored TB but still think this intake could use some serious design improvements.
-
- I made it to triple digits!
- Posts: 151
- Joined: November 2nd, 2010, 9:20 am
- Stroker Displacement: 4.0
- Vehicle Year: 1999
- Vehicle Make: Jeep
- Vehicle Model: XJ
Re: Finally made it to the track
weighs about 3500 with me in it. with full interior which is how it was in the video....Ill take it and weigh it tonight for an exact number though.
in normal race trim, without me it weighs 3130.
in normal race trim, without me it weighs 3130.
-
- I made it to triple digits!
- Posts: 141
- Joined: February 28th, 2012, 6:31 pm
- Stroker Displacement: 4.7
- Vehicle Year: 1999
- Vehicle Make: jeep
- Vehicle Model: WJ
Re: Finally made it to the track
Adds up, 245-260hp to the wheels with the right gearing, good launch etc should run a 13.8 to a 14.4 at approx 98-103mph. aside from the box in the wind factor on the big end... even with a 2.10 60ft it should get there.
-
- I made it to triple digits!
- Posts: 151
- Joined: November 2nd, 2010, 9:20 am
- Stroker Displacement: 4.0
- Vehicle Year: 1999
- Vehicle Make: Jeep
- Vehicle Model: XJ
Re: Finally made it to the track
3480 with me in it
-
- BANNED
- Posts: 297
- Joined: December 3rd, 2011, 2:01 am
- Vehicle Year: 1998
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
Re: Finally made it to the track
What mods are on your motor? How much HP do you think that you make?
1998 XJ 2D AW4 32"MTR 3.55 4.5"RC JCR Slider Magnaflow 150rwHP/174rwTQ=> Sprintex SC Gibson Header 6lb 120-140*IAT 211rwHP/274rwTQ WasherFluid Inj 70mmTB 7.5lb 100-120*IAT=>Now 12 pounds Boost=> +BV ported head
99 XJ M62 S/C
99 XJ M62 S/C
-
- I made it to triple digits!
- Posts: 151
- Joined: November 2nd, 2010, 9:20 am
- Stroker Displacement: 4.0
- Vehicle Year: 1999
- Vehicle Make: Jeep
- Vehicle Model: XJ
Re: Finally made it to the track
Im really not sure the numbers. hopefully getting close to 300.
the big limiting factor right now is traction.
it is running some N20, but its extremely rich right now.
the big limiting factor right now is traction.
it is running some N20, but its extremely rich right now.
-
- Making Progress
- Posts: 61
- Joined: June 20th, 2009, 9:07 pm
- Stroker Displacement: 4.7l
- Vehicle Year: 1996
- Vehicle Make: jeep
- Vehicle Model: cherokee
- Location: santa fe tx
Re: Finally made it to the track
so if i am reading this correct it went 13.6 on spray? if so what hp shot? i like the drag stars on the front ...i put my drag lites off my fox body on my xj one nite and did a little street racing...man that thing would take off like a crackhead with your vcr...i would leave off a 150hp shot and it would just dead hook ..
Who is online
Users browsing this forum: No registered users and 10 guests