Page 1 of 1

vendor question

Posted: June 25th, 2012, 1:08 am
by john c michael
anyone have an opinion or information in regards to Clegg Automotive and Machine. i see they offer some kits and built heads. But i am weary of anyone i see on ebay these days.

Re: vendor question

Posted: June 27th, 2012, 2:27 pm
by john c michael
i suppose the silence is a good indication of the quality of this vendor, or lack of.

Re: vendor question

Posted: June 27th, 2012, 3:08 pm
by Retlaw01XJ
Try a Google search.
They have a good rating from the BBB and there are other sites with ratings as well. Mostly favorable.

Re: vendor question

Posted: June 27th, 2012, 4:35 pm
by SilverXJ
I have heard of them before and nothing negative was said.

Re: vendor question

Posted: July 1st, 2012, 8:15 am
by john c michael
thanks for the info.

Re: vendor question

Posted: December 10th, 2012, 8:27 pm
by Superhero
Did you ever buy from Clegg? I was looking at their website (http://www.cleggengine.com/stroker-kits ... -kits.html) and was very interested, but hadn't really found anyone who had tried their products.

Re: vendor question

Posted: January 6th, 2013, 5:44 pm
by john c michael
Superhero wrote:Did you ever buy from Clegg? I was looking at their website (http://www.cleggengine.com/stroker-kits ... -kits.html) and was very interested, but hadn't really found anyone who had tried their products.
i have not bought yet. i have not found anyone who has used them either