Jeep Strokers

stroker is done, waiting on my brown dog motor mounts and decided to do away entirely with the stock fans, i ordered three 9" 1500cfm fans

what is the best way to control these, first time setting electric fans up and need some good advice, id like to have 1 fan to come on at a lower temp and the other two at about 210?


thanks for the help

Paul

I Use Derale Adjustable Thermo Switches but they are designed for no more then 2 fans but with your plan of different temps you would need 2 controllers anyways...

The fans I ordered are 8 amps each. U think I could use the stock wiring to run 2 at the stock cut on temp and run a controller for the other fan for the lower temp?

You could allways run a correctly rated relay wired to come on with stock wiring.
Easy enough to do.
Dont know what the stock fan is rated at.

tequila mike wrote:You could allways run a correctly rated relay wired to come on with stock wiring.
Easy enough to do.
Dont know what the stock fan is rated at.

damn, never thought of that, perfect solution

thanks