Jeep Strokers

Whom was the member that was selling bored throttle bodies ? Had a web site that had TB and adjustable FPR`s.

My search skills suck today.

SilverXJ wrote:http://www.strokedjeep.com/

Bingo Silver !! Found it while trying some search words. Thanks for the help.

When the stroker was built the idle was a bit off. The engine seemed to load up on decel and idle. Taking the advice of Bennie I drilled a small hole in the throttle plate to pass a bit more air. It fixed the problem and all was good.

Did your crank sensor mod (which I am still very happy with) and am now finding that idle to be a little off. Want to start with a virgin throttle plate and tune the engine from there.

What I have found is that I may have drilled a bit oversized hole in my TB plate for closed throttle operation and the advanced timing.

If you still have my number give me a call sometime. Like to talk Apexi with you.

Or perhaps shoot me a PM with your number and a good time to call.

Thanks all !!