Page 1 of 1
what am i missing?
Posted: December 23rd, 2011, 5:32 pm
by bradcarrier
About to install my stroker in my 95 jeep yj. I've got the 24# blue top injectors, just ordered my luk pro gold clutch clutch, do I need anything else to make this work with with my jeep. Do I need a different pilot bearing because of the 4.2 crank, anything else I'm missing? Thanks
Re: what am i missing?
Posted: December 24th, 2011, 10:13 am
by Missourian
Pilot bearing is the same and make sure you replace your throw out bearing while you are doing all this to reduce risk of having to pull it all back apart.
Re: what am i missing?
Posted: December 24th, 2011, 11:43 pm
by Cheromaniac
You'll need pilot bearing no. 53009180AB.
Re: what am i missing?
Posted: December 28th, 2011, 12:05 pm
by bradcarrier
Cheromaniac wrote:You'll need pilot bearing no. 53009180AB.
You must be DINO, thanks for all the good info!!!
Re: what am i missing?
Posted: December 28th, 2011, 2:53 pm
by 6TIME
That Mopar pilot bearing number crosses over to a TIMKEN/BCA/NATIONAL part #FC69907, That might be more readily available in local parts stores if they have problems cross referencing from the Mopar #....
Re: what am i missing?
Posted: December 28th, 2011, 10:06 pm
by Cheromaniac
bradcarrier wrote:Cheromaniac wrote:You'll need pilot bearing no. 53009180AB.
You must be DINO, thanks for all the good info!!!
Yup. I'm Dino and you're welcome.
