Stroker Planning Phase

Swaping 258 to 4.0, 4.0 parts to 258 etc!
Post Reply
shortgoroper
Posts: 2
Joined: September 25th, 2011, 4:10 pm
Vehicle Year: 1983
Vehicle Make: Jeep
Vehicle Model: CJ7

Stroker Planning Phase

Post by shortgoroper »

I need some help. I am in the planning phase.

I have been slowly tracking down parts to build a 4.6L stroker. When I picked up the 4.0L block and head it was just that... no pulleys, water pump, brackets, etc.

What all can I salvage/re-use on the 4.6L. For example, could I use the belts/pulleys, and brackets for the Alt. and Power Steering from the 258??

I plan on running the Weber 38/38 I have and putting on a Clifford Intake.

Thanks
matt
User avatar
IH 392
I love JeepStrokers.com!!
I love JeepStrokers.com!!
Posts: 725
Joined: October 4th, 2008, 11:15 am
Location: Eugene ORYGUN
Contact:

Re: Stroker Planning Phase

Post by IH 392 »

Use the accessory's that go with the chassis your putting it into.
You can get more power out of ANY engine!!!
ASE Master certified engine machinist, gas and diesel
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 10 guests