4.6L Stroker- "What I Did" thread
Posted: July 6th, 2011, 9:15 am
I made a suggestion in the general forum but I figured I'd try this too and see if it catches on. I'm hoping to start a "sticky" thread if the mods will allow.
This one is labeled "4.6L Stroker- What I Did" and I'd like to get people to post replies as to what their build consisted of, no matter how in depth or simple it was, as long as it was only the 4.6L build. Other threads may be started with other displacments if this seems like a good idea to anyone else. This would not be a place for questions and answers, just information. I'd like to have you include what you started with and what parts you included in your build- give vintage of parts and part numbers too if you can. Include any machine work you had done or did yourself. Then also give your opinion of the results (if you've got dyno numbers for your build include them too) and detail what problems you incountered, have, or fixed. Other information that could be included : type of fuel, mpg, cost, application (dd, race, rock, mud, etc...), tire size, lift/drop, and so on.
I feel this could prove to be a valuable tool and helping newbies like myself. I don't want this to become a hypetheticle with responses about calculations or how to build a stroker, I would just like actual real world-already built and driven storkers to reply. If you feel the need to ask questions PM the person whom posted something you're interested in- it will help keep the thread uncluttered.
Anyone have any interest in contributing?
This one is labeled "4.6L Stroker- What I Did" and I'd like to get people to post replies as to what their build consisted of, no matter how in depth or simple it was, as long as it was only the 4.6L build. Other threads may be started with other displacments if this seems like a good idea to anyone else. This would not be a place for questions and answers, just information. I'd like to have you include what you started with and what parts you included in your build- give vintage of parts and part numbers too if you can. Include any machine work you had done or did yourself. Then also give your opinion of the results (if you've got dyno numbers for your build include them too) and detail what problems you incountered, have, or fixed. Other information that could be included : type of fuel, mpg, cost, application (dd, race, rock, mud, etc...), tire size, lift/drop, and so on.
I feel this could prove to be a valuable tool and helping newbies like myself. I don't want this to become a hypetheticle with responses about calculations or how to build a stroker, I would just like actual real world-already built and driven storkers to reply. If you feel the need to ask questions PM the person whom posted something you're interested in- it will help keep the thread uncluttered.
Anyone have any interest in contributing?
