Where to get 707 amc conrods?
Posted: March 30th, 2011, 5:25 am
Hello all,
This is my first post and first off I would like to say there is some grate info on this forum, the FAQ section rocks.
My question regards the 707 cast 258 amc rods. A couple of write ups on the web list reconditiond sets for around $120. best I can find on the web is about $75 each.
Now I am in Australia so going to the u-pull it wrecker is not an option- no 4.2 imported into australia.
They way it is looking is that it may be cheaper to use the 4.0 conrods I have & KB ic944 pistons.
Hypuretic pistons would be fine for my application but but if i have to throw the lions shareof $500 at it I might as well get the forged pistons anad use my 4.0 conrods.
Sooo does anybody know where I can get a set of recoed conrods at a reasonable price?
This is my first post and first off I would like to say there is some grate info on this forum, the FAQ section rocks.
My question regards the 707 cast 258 amc rods. A couple of write ups on the web list reconditiond sets for around $120. best I can find on the web is about $75 each.
Now I am in Australia so going to the u-pull it wrecker is not an option- no 4.2 imported into australia.
They way it is looking is that it may be cheaper to use the 4.0 conrods I have & KB ic944 pistons.
Hypuretic pistons would be fine for my application but but if i have to throw the lions shareof $500 at it I might as well get the forged pistons anad use my 4.0 conrods.
Sooo does anybody know where I can get a set of recoed conrods at a reasonable price?