I was curious what kind of exhaust every one was running? I already have a header i just need header back. I dont fill like spending a whole lot but i do want a decent exhaust with a good sound. Also did you guys keep the cats and O2 sensors?
Thanks in advance!
Exhaust
- aaronkeiser
- Making Progress
- Posts: 82
- Joined: February 13th, 2008, 9:50 pm
- Stroker Displacement: 4.6
- Vehicle Year: 1991
- Vehicle Make: Jeep
- Vehicle Model: Wrangler
- Location: Santa Clarita, CA
- Contact:
Re: Exhaust
Well right now im running the stock exhaust on my 91 wrangler 4.0 with high flow cat and a cheap cherrybomb turbo muffler. It's quiet when cruizing around but if you get on it you can hear it. After wheeling season this year I'll tear into my jeep to put in the new stroker I plan on welding a 2.5in collector on my APN header and run 2.5 all the way through with a catco cat and flowmaster. Since I live in California I'm defiantly going to keep the cat and O2. Plus I do like to wheel my jeep and not smell all that exhaust. You don't have to have an 02 senser but it will run like crap and give you 'Check engine' light. My dads 68 ford pickup with a BB 460 has no cat and let me tell you...that thing is the epitome of 'gross polluter' Everyone behind him on the trail is like "god dam that thing smells" I don't think its worth getting rid of a cat unless is a race car. I believe thats why cat companies make "high flow" cats so you CAN have both, high flow and a working cat.
- FrankZ
- Making Progress
- Posts: 93
- Joined: April 3rd, 2008, 6:44 am
- Stroker Displacement: 4.6l
Re: Exhaust
APN Header and a Flowmaster Delta 49. Wanna hear it?
Click the link!!
http://video.google.com/videoplay?docid ... 6118&hl=en
Click the link!!
http://video.google.com/videoplay?docid ... 6118&hl=en
-
- Where's the "any" key?
- Posts: 21
- Joined: March 16th, 2008, 9:59 am
Re: Exhaust
So you have stock pipes and cat? If so the this is is mine is all rusted out and i pretty much need header back.FrankZ wrote:APN Header and a Flowmaster Delta 49. Wanna hear it?
Click the link!!
http://video.google.com/videoplay?docid ... 6118&hl=en
- FrankZ
- Making Progress
- Posts: 93
- Joined: April 3rd, 2008, 6:44 am
- Stroker Displacement: 4.6l
Re: Exhaust
Yep, sure do. Got my header from APN. Linky follows...
http://www.autopn.com/store/pc/viewprd. ... duct=20009
http://www.autopn.com/store/pc/viewprd. ... duct=20009
- Cheromaniac
- I live here
- Posts: 3192
- Joined: March 8th, 2008, 12:58 pm
- Stroker Displacement: 4563cc
- Vehicle Year: 1992
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Cyprus
- Contact:
Re: Exhaust
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car
-
- Posts: 2
- Joined: March 25th, 2008, 6:48 am
- Stroker Displacement: 4.7
- Vehicle Year: 1993
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: San Bruno, CA.
Re: Exhaust
I'm running an APN header to a 2.5" exhaust that I fabricated out of the U bends you can get from Summit and similar places. The cat is a Catco high flow unit and the muffler is a Dynomax. This is on a '93 so the O2 sensor is on the down pipe/crossover. I did add an extra O2 bung for a wideband.
- 1bolt
- Donator
- Posts: 545
- Joined: January 18th, 2008, 4:06 pm
- Location: Culpeper Virginia
Re: Exhaust
Borla to a "hi flow" Cat to a Flowmaster, mandrel bent all the way back... more than one person has asked me if I swaped a V8 in just from the idle sound.
--
Simon
Looking for a 232 crankshaft see my want ad: http://www.jeepstrokers.com/forum/viewt ... =17&t=1292
http://www.jeepstrokers.com 94 XJ Stroked lifted locked. 89 MJ restored Work truck, 88 YJ going on third build up and second Stroker.
Simon
Looking for a 232 crankshaft see my want ad: http://www.jeepstrokers.com/forum/viewt ... =17&t=1292
http://www.jeepstrokers.com 94 XJ Stroked lifted locked. 89 MJ restored Work truck, 88 YJ going on third build up and second Stroker.
- Jeep-Power
- Donator
- Posts: 184
- Joined: February 13th, 2008, 7:32 pm
- Stroker Displacement: 4.3
- Vehicle Year: 1984
- Vehicle Make: AMC/Jeep
- Vehicle Model: CJ-7
- Location: Fort Mill, SC
Re: Exhaust
I'm runnig one of those Chinese SS headers-- EXACT same thing as the Banks. Fixed it with a 2.5" SS exhaust-- hi-flow cat and Dynomax glasspack. It sounds MEAN!
Had to keep the o2 for the system to work
Before the chop
With the 2.5" tube
Here's the full writeup-
`
Had to keep the o2 for the system to work
Before the chop
With the 2.5" tube
Here's the full writeup-
`
-- TallPeter
'84 CJ-7 - tonned & turbo'd
'84 CJ-7 - tonned & turbo'd
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 0 guests