Jeep Strokers

** WARNING BIG PIMP FACTOR **

Great initial support from the market has brought us into the game of inline 6 performance parts. Our first two products are crank scrapers and forged pistons. We plan on USA made forged rods and some other goodies we will show off later. The support that I6 fans have given has been great and we appreciate your input and threats We are proud to annouce our lineup of precision pistons for the 4.5 4.7 4.0 4.2ltr engines. If you have any input or need anything special on these please email us at [email protected]. We are about 8 weeks out right now on pistons but we will be stocking lots and lots of pistons.

Details here


http://www.bulltear.com/catalog/product ... cts_id=242

These are FORGED inline 6 pistons for use in STROKER AND NON STROKER applications (using either 4.2 or 4.0 rods). This preorder will allow you to lock in your order and save money as well. These pistons are available at ANY compression FROM FLAT TOP TO DISH and come with pins and for a limited time we will throw in wire locks and cut grooves for wire locks for FREE. PISTONS REQUIRE AT LEAST AN 8 WEEK LEAD TIME. During this lead time customers may change their compression but no refunds will be given. Please pick your compression and application and fill it in in the notes area when paying.

Groovy! It's high time the AMC Six got the (aftermarket) respect it so richly deserves! I know the AMC V8s can be made into killer mills, but I know it was also possible with the Modern Era Sixes - just took some doing (because you had to find something else that "just happened to fit.")

Hell, these engines were only in production in some form or another for forty years or so, and I'm glad some outfits are getting around to building solid parts. I'm not ready for them yet myself, but I'm hoping to be in the market in the next year or so...

Is the pin height variable or do you have a fixed number for the 4.0 or 4.2 rod? What alloy are you using? They are designed for floating or pressed pins?

Pin height/Compression height is variable
Material 2016 or 4032 depending on boost and application
Press fit or full float (full float with wire locks and machined grooves free for the orders made between 2-18-2010 to 4-10-2010)