Jeep Strokers

My 4 liter is slowly starting to develope some bad piston slap. I would like to consider a 4.6 stroker but dont know if i could build one to run on pump gas. I guess what im trying to ask is those of you who have had a succesful pump gas build if you could post your build thread or the parts that are in your stroker and the specs of boring etc..... thx guys

look around the site. Pay close attention to the projects section. Most run pump gas of some flavor.

I run mine on 87 octane in the cooler months when it's less than 90*F outside and 91 octane in the hotter months when it can get as high as 120*F.