Here are my options on location of squirter. Are either of these where you put yours? Top image would try to hit cam gear, bottom image would hit dizzy gear.
Low oil pressure question
- oletshot
- Donator
- Posts: 221
- Joined: February 14th, 2008, 11:47 am
- Location: Chicagoland
Re: Low oil pressure question
I'm not clever enough to have a clever signature. I'll just steal yours.
'98 XJ 2-door, '94 YJ.
'98 XJ 2-door, '94 YJ.
- John
- I love JeepStrokers.com!!
- Posts: 709
- Joined: February 13th, 2008, 8:35 pm
- Stroker Displacement: 4.6
- Location: West Virginia
Re: Low oil pressure question
Mine are all internal to the case. I tried to hit the distributor gear. Really unsure if it would change much,if you put extra oil on one of the two gears, you will put extra oil on both.
John
John
- oletshot
- Donator
- Posts: 221
- Joined: February 14th, 2008, 11:47 am
- Location: Chicagoland
Re: Low oil pressure question
Ok, distributor gear it is. I know the oil will hit that, trying to hit the cam gear was going to be a crap shoot and I didn't feel it made a difference which one I hit just wanted other opinions. I just have to make sure only the oil hits the gear and not the fitting too. Otherwise it looks pretty straight forward. I also going to grind a flat on one of the extra lifters to make my own camsaver lifter just for fun (they sent me 16 lifters with my cam). I'm not sure how deep the flat is, for now I'll just eyeball it to the picture. I'll post a picture after it's done.
I'm not clever enough to have a clever signature. I'll just steal yours.
'98 XJ 2-door, '94 YJ.
'98 XJ 2-door, '94 YJ.
- John
- I love JeepStrokers.com!!
- Posts: 709
- Joined: February 13th, 2008, 8:35 pm
- Stroker Displacement: 4.6
- Location: West Virginia
Re: Low oil pressure question
http://www.hesco.us/forum/forum_posts.a ... PN=1&TPN=3
Thought you might find this interesting, third entry.
John
Thought you might find this interesting, third entry.
John
- Flash
- I love JeepStrokers.com!!
- Posts: 693
- Joined: February 17th, 2008, 10:45 pm
Re: Low oil pressure question
What i found REAL interesting was the 5th post, and about the drain back oil for the dist.John wrote:http://www.hesco.us/forum/forum_posts.a ... PN=1&TPN=3
Thought you might find this interesting, third entry.
John
Flash
89 XJ with 300,000 on the original eng
"I've also never completed a motor, yet. My mouth (fingers) is also writing checks my ass can't cash."
"I've also never completed a motor, yet. My mouth (fingers) is also writing checks my ass can't cash."
- John
- I love JeepStrokers.com!!
- Posts: 709
- Joined: February 13th, 2008, 8:35 pm
- Stroker Displacement: 4.6
- Location: West Virginia
Re: Low oil pressure question
Oh poo, I am loosing my ability to count now. That's the one.
John
John
Who is online
Users browsing this forum: No registered users and 2 guests