I've started a mess as my 98xj popped a oil pump @ 280k
I've got ..
a 88 block, 95 head, next week a 9.2yj 4.2l
I already have a 01 intake and borala header ..
I hope to get the porting started this weekend (just a bit)
then pickup the 4.2l next week !
I have a 88 cam , a 98 cam and I'm hoping to get some $ up for a new one
but I was wondering if I had to use stock which is the best ?
also I learned that the 88 head used bider stems for the valves then the 95
..crap
ghetto garage build !
-
- Posts: 9
- Joined: November 19th, 2009, 7:47 am
- Vehicle Year: 1998
- Vehicle Make: jeep
- Vehicle Model: cherokee
-
- Posts: 9
- Joined: November 19th, 2009, 7:47 am
- Vehicle Year: 1998
- Vehicle Make: jeep
- Vehicle Model: cherokee
Re: ghetto garage build !
Can I use the girdle from my 98 block on the 88 block?
I've not seen it open yet, and I'm wondering if it's like a honda one
(alloy addition to the main caps machined into place)
I've not seen it open yet, and I'm wondering if it's like a honda one
(alloy addition to the main caps machined into place)
- amcinstaller
- I love JeepStrokers.com!!
- Posts: 609
- Joined: May 22nd, 2008, 11:57 pm
- Stroker Displacement: 4.6L
- Vehicle Year: 1980
- Vehicle Make: AMC
- Vehicle Model: Spirit
- Location: Red Deer, AB, Can
Re: ghetto garage build !
i think you can use the main girdlw but youll need to space it out from the caps a little bit so it will clear the crank.
1980 AMC Spirit Restomod in Progress
SilverXJ wrote:Roller rockers won't help that mess you have created. Nor will God for that matter.
-
- Posts: 9
- Joined: November 19th, 2009, 7:47 am
- Vehicle Year: 1998
- Vehicle Make: jeep
- Vehicle Model: cherokee
Re: ghetto garage build !
thanks ..cheers
- SilverXJ
- Global Moderator
- Posts: 5790
- Joined: February 14th, 2008, 7:14 am
- Stroker Displacement: 4.6L
- Vehicle Year: 2000
- Vehicle Make: Jeep
- Vehicle Model: Cherokee
- Location: Radford, Va
Re: ghetto garage build !
You will also need the main cap bolts with the stud end for the main girdle to fit.
2000 XJ. 4.6L stroker
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
00+ Viper Coil Swap | CPS Timing Increase Mod | Fabricated Airbox | Dash bezel, Arduino Multigauge & RD Conceal
Eat, breath, drink, sleep, Jeep, drink
-
- Posts: 9
- Joined: November 19th, 2009, 7:47 am
- Vehicle Year: 1998
- Vehicle Make: jeep
- Vehicle Model: cherokee
Re: ghetto garage build !
SilverXJ wrote:You will also need the main cap bolts with the stud end for the main girdle to fit.
perfect , thanks ..they will be donated by the cause of the stroker
-
- Posts: 9
- Joined: November 19th, 2009, 7:47 am
- Vehicle Year: 1998
- Vehicle Make: jeep
- Vehicle Model: cherokee
Re: ghetto garage build !
so if I've used the calculator right, the base stroker with the 258 rods and the 99/01 cam
makes for 9:79 s and the "perfect" 8:1 d , with the ford 24lbs injectors I should (at sea level)
be able to make this run on 89?
makes for 9:79 s and the "perfect" 8:1 d , with the ford 24lbs injectors I should (at sea level)
be able to make this run on 89?
Who is online
Users browsing this forum: No registered users and 32 guests