Jeep Strokers

Where can I find a good deal on a 12CW crank?


I think I'm going with 4.0 rods but 4.0 and 4.2 rod suppliers would be great.


Thanks

I will give everybody a source here, but it's in Quebec, Canada, so I don't know if it's worth it with shipping and all. But that's where I found mine, 10/10 :

http://www.crank-kit.com/

It's in Montreal, Quebec.

I've got a 20/30 12-wt crank that I ended up not using. Just needs bearings and you're set.

Exos wrote:I will give everybody a source here, but it's in Quebec, Canada, so I don't know if it's worth it with shipping and all. But that's where I found mine, 10/10 :

http://www.crank-kit.com/

It's in Montreal, Quebec.

How much did it cost you?

I don't recall the exact amount, but it was 250$ ish....rod and main bearings included. Balancing of the crank, pistons, and rods was also included.

Anyone Buy from here?

http://www.precisionengine.com/crank-kits/


AM258-723CK AMC 258 #723 170.00

Includes Bearings

is that including core?

Thats cheap........anybody buy one yet? Hmmmmmmm new here but I am thinking about building a stroker and really looking at and studying everything. Didn't want to have to pay too much for a crank and this one looks awesome!

Bodo wrote:is that including core?

They said core is 100$ sadly. It wasn't listed on there site.

Now I have to source a core.

They also said most of there cranks are .10/.10

I got mine from RPM Machine IIRC. Can't remember what I paid for it but I know there was like a $130 core on it too. I want to say I paid a little over $300 for the crank, rod and bearing sets. Less the core that isn't a bad price.

I just saw a crank and R/M bearings from Carter performance for $229. No core!