Page 1 of 1
Emissions testing
Posted: July 27th, 2009, 2:38 pm
by offrd3
Has anyone taken their stroker through emissions testing where they plug into your computer or where they take a tail pipe reading if so was the reading they took close to a stock 4.0l. my problem is i live in New Jersey and they plug right into the computer and check everything that way so their really strict. any help would be much appreciated. thanks
Re: Emissions testing
Posted: July 27th, 2009, 4:01 pm
by gradon
Mine's coming up in a month and a half. In MD, obd2 vehicles get plugged in, so anything that causes a cel will make it fail. My aux fan mod(switchable ground to relay) used to set a cel before the unichip install. Strokers might have a little more emissions, but should still fall w/in 4.0 specs.
Re: Emissions testing
Posted: July 27th, 2009, 7:51 pm
by offrd3
yea mines an obd2 aswell, I'm all realy to do this project but i need to know if i can still pass, its getting harder to buy a sticker in new jersey these days