Stroker Compression Ratio and fuel
Posted: May 25th, 2009, 9:12 pm
ok this is my 2nd stroker. 4.2 crank, 4.2rods, stock cam 99 intake, header back exhaust. .040 pistons new lifters, rebuilt head.
281.53ci
4.61L
9.96:1 static CR
8.24:1CR
.0725 Quench
60.95 Intake closing Angle
Is my compression Ratio ok for colorado?
What injectors should i use (99 xj)
will my stock cam work?
anything else i should know ?
281.53ci
4.61L
9.96:1 static CR
8.24:1CR
.0725 Quench
60.95 Intake closing Angle
Is my compression Ratio ok for colorado?
What injectors should i use (99 xj)
will my stock cam work?
anything else i should know ?