Page 1 of 1
looking for cheap and easy pistons
Posted: May 15th, 2009, 9:46 am
by BREEZE1
Whats the cheapest pistons I can get to put in my stroker? Something that I don’t have to get dished.. I was planning on building a 4.7l, but it seems like folks are having trouble getting pistons or either they cost an arm and a leg.
Re: looking for cheap and easy pistons
Posted: May 15th, 2009, 9:58 am
by Muad'Dib
All of the inexpensive (Hate calling them cheap) pistons are going to need to be dished to get a decent compression ratio. However, dishing is cheap if you contact oletshot on this board. And the pistons themselves are cheap also. Look at the FAQ for pistions... The 2229's or 677's are going to be your best bet.
Re: looking for cheap and easy pistons
Posted: May 27th, 2009, 9:29 pm
by astjp2
I like the H825CP's from summit, bout 22.00 each. Tim