intake
-
yuppiexj
- Donator
- Posts: 319
- Joined: February 13th, 2008, 7:31 pm
- Stroker Displacement: 4.5 needs assembly
- Location: Fredercksburg VA (land of nothing)
Re: intake
TurboTom wrote:i will eat my words later if need be.
Proud owner of many stroker parts, that have not yet spontaneously assembled themselves.TurboTom wrote: Not sure of your rules...but you need to start with an engine that works best for the rules and cheat from there!
-
eastin82
- Donator
- Posts: 65
- Joined: April 3rd, 2009, 8:04 pm
- Stroker Displacement: 4.6
Re: intake
sorry for the misunderstanding. i already have a line on a bare intake 99+ was just wondering if the goodies from my 91 would fit on it and work.
keepin the five alive!
-
yuppiexj
- Donator
- Posts: 319
- Joined: February 13th, 2008, 7:31 pm
- Stroker Displacement: 4.5 needs assembly
- Location: Fredercksburg VA (land of nothing)
Re: intake
I fail reading comprehension... 
Vacuum ports are in slightly different locations. rerouting will be needed.
You will either need a 96+ PS pump and bracket, or modify the 1991 bracket to work.
If you switch to the 96+ PS pump and bracket, your idler pulley needs to come off and you will need a belt for a 99+ model.
Injectors, rails, sensors, etc. will all work.
Vacuum ports are in slightly different locations. rerouting will be needed.
You will either need a 96+ PS pump and bracket, or modify the 1991 bracket to work.
If you switch to the 96+ PS pump and bracket, your idler pulley needs to come off and you will need a belt for a 99+ model.
Injectors, rails, sensors, etc. will all work.
TurboTom wrote:i will eat my words later if need be.
Proud owner of many stroker parts, that have not yet spontaneously assembled themselves.TurboTom wrote: Not sure of your rules...but you need to start with an engine that works best for the rules and cheat from there!
-
eastin82
- Donator
- Posts: 65
- Joined: April 3rd, 2009, 8:04 pm
- Stroker Displacement: 4.6
Re: intake
great thats what i was wanting to hear. its going in a cj without power steering so thats not a problem. although i need to do some research as to how i can put ps on my jeep but thats down the road.
keepin the five alive!
Who is online
Users browsing this forum: No registered users and 8 guests