Page 3 of 3
Re: Cybershots 4.7L Stroker build up thread
Posted: June 3rd, 2011, 6:30 pm
by dragginwagon406
Thanks for taking the time to post pics.
1
Re: Cybershots 4.7L Stroker build up thread
Posted: July 13th, 2011, 1:29 am
by way2evil
what intake valve & exhaust valve are these in the build and where could it be found at.
nice build, have you programmed it?
Re: Cybershots 4.7L Stroker build up thread
Posted: July 17th, 2011, 6:11 am
by Cybershot
Cybershot wrote:.......Decider to go for
sealed power products. They have good reputation from stroker builder.
Missing is:
- intake valve
- rod bearing
- cam bold with spring and trust pin
I used Sealed Power valves..... no issue with the Stroker. Runns strong and smooth from the first day!
Re: Cybershots 4.7L Stroker build up thread
Posted: July 24th, 2011, 3:14 pm
by way2evil
I am currently collecting the parts for my stroker which is almost identical specs to your build and only difference is that i would be getting 68-232-4 comp cams and Mopar Performance stainless steel exhaust valves.
So I would like to know as your build is almost identical which push rods you have used is the stock push rods or did you adjust or used different size push rods.
Oh and by the way I am living in Dubai and nice to see some stroked jeeps in the Emirates.
