Page 3 of 3
Re: Newbie checking in and ready to build!
Posted: November 11th, 2010, 7:17 am
by pma4x4
Well thanks to pay cuts due to this wonderful economy this project has been on hold since last winter. I have not moved any further on it yet.
I was wondering on the fuel system if anyone could chime in. My 96 system is 49psi Rail and 24lb injectors. Is there anything I need to do for a 4.6/4.7 build fuel wise?
Re: Newbie checking in and ready to build!
Posted: November 11th, 2010, 5:35 pm
by tjjc00
im just starting out as well but i have read in alot of places that is what you want. Is that OEM or did someone install it. I have a 98 but i dont know what it is. i have been shopping around for some 24lb injectors would love to cross it off the list
Re: Newbie checking in and ready to build!
Posted: November 12th, 2010, 5:47 am
by pma4x4
From what I understadn my year is one of the highest psi
I got this from NAXJA
1987-1990 53003956 Black 39psi 18.6lb/hr
1991-1993 33007127 Brown 39psi 21.0lb/hr
1994-1995 53030343 Tan 39psi 21.0lb/hr
1996-1999 53030778 Grey 49psi 23.2lb/hr
1999-2006 04854181 Blue Tip 49psi 22.5lb/hr
Re: Newbie checking in and ready to build!
Posted: November 12th, 2010, 5:51 am
by pma4x4
I here a lot of people getting higher psi pump and FIs but it all seems to be right around what I already have. Mario at Adventure Trailers told me It would be a good idea for me to get a Fuel/timer adjuster from Split second. But with his '92 MJ being an OBD 1 I don't know if it even applies to my engine.