Page 2 of 2
Re: Dicking with porting
Posted: December 23rd, 2015, 7:59 am
by Russ Pottenger
Cheromaniac wrote:SilverXJ wrote:You could use a dremel, but it would take forever. Plus the SA kit won't work with a dremel.
I used my electric drill. Not exactly the best tool for the job but it worked for me.
I've ported seven heads and two intake manifolds using the same method.
Dino,
You must have the patience of a Saint.
Re: Dicking with porting
Posted: December 23rd, 2015, 9:29 am
by jsawduste
Off topic,
Russ I will have that 630 off to you sometime in the next week or so. Tanked and glass beaded already.
Re: Dicking with porting
Posted: December 23rd, 2015, 9:57 am
by Cheromaniac
Russ Pottenger wrote:
Dino,
You must have the patience of a Saint.
Yeah it was slow and tedious but looking back, it wasn't too bad. Took me about one hour per cylinder and it was well worth the effort.
Re: Dicking with porting
Posted: December 23rd, 2015, 3:08 pm
by jeepxj3
amceaglesx4 wrote:Cheromaniac are you that Dino Saava guy ?
Yes he is.
Re: Dicking with porting
Posted: December 24th, 2015, 2:41 am
by Cheromaniac
amceaglesx4 wrote:Cheromaniac are you that Dino Savva guy ?
Yup. The one and the same.
