Re: Head milling
Posted: September 25th, 2017, 4:46 pm
Yella Terra makes 1.7 ratio rockers?
Jeep - AMC 4.0L and 4.2L Stroker Enthusiasts
https://www.jeepstrokers.com/forum/
Changing the overall length of a valve does not influence camshaft/valve lift, but can have some adverse effect on rocker arm geometry.Hedworx wrote:I took 30 thou off the bottom of mine, compressed 43thou gasket, Yella Terra 1.7 ratio roller rockers and a comp 68-232-4 cam. I haven't had any issues but I did take 50thou off the top off the valves to offset the extra lift. Maybe that is robbing me of lift now that I know there's enough space in there but I thought it prudent at the time.