Page 2 of 2
Re: Broken Stroker, Crank end play is 1/8" out of spec. Hel
Posted: January 11th, 2014, 7:29 am
by dwg86
I wonder if the crank was out of spec...thrust bearing surface too wide. I have read that some of the scat cranks have been out of spec (bearing surfaces).
Re: Broken Stroker, Crank end play is 1/8" out of spec. Hel
Posted: January 12th, 2014, 1:12 am
by DaemonForce
That crank is definitely out of spec. Next time pull one from an AMC.
Re: Broken Stroker, Crank end play is 1/8" out of spec. Hel
Posted: January 13th, 2014, 6:15 am
by Phman9
My first 4.6 build was done by western engine supply. I got it back with the lower and upper end assembled. I did not see the thrust surface on my first build. New crank and bearings are in. New engine sounds amazing. For sale! 2001XJ Limited 4.6 stoker.