Jeep Strokers

The PCM has been unplugged for over a month so I doubt theres anything saved. The motor didnt like to stay running, as the cam does not pull a lot of vacume at idle. Once on the throttle under load, it seemed to run better but theres still some hesitation and surging. I still have to tweak with the Apexi to see if the stock ECU can manage. This was with all "factory" settings, I took 5% of fuel out at idle through 2000rpm with the Apexi and it worked enough to get me around the block. I think it needs more fuel taken out. The lack of vacume from the cam is making the computer thing its running higher RPM so theres a lot of fuel being dumped in. Once I get the wideband I will be able to see how well it can be tweaked before the MS goes in.

AARON

Bump this thread up. I have the same cam and I'm having the exact same issues. Did you ever get this running correct and did it ever make any vacuum?

Thanks

It's been five years since Aaron last posted so he may not have the Jeep anymore.