Page 2 of 2
Re: '99 MJ Project - Possible Stroker Build - HELP
Posted: January 11th, 2010, 1:19 pm
by go4lo
gradon wrote:Someone posted a few weeks ago a link to the KB944s that could be had for ~$350, so search around here. I don't know if that included the rings.
Thanks for the tip! I found the old post. Looks like they've gone up slightly on their price but still not bad. $425.00 for a set of the KB944s and $65 for KTM Molly rings.
http://www.cnc-motorsports.com/product. ... 443&CtgID=
If I'm correct I should be able to order these, use my stock 4.0L rods, and a 4.2L crank?
No block or head shaving required?
Re: '99 MJ Project - Possible Stroker Build - HELP
Posted: January 11th, 2010, 2:51 pm
by Plechtan
Plechtan wrote:As far as your choice of parts, i would stick with the 4.0 rods and use the KB944 pistons. By the time you buy new rods, and get the pistons dished deeper, it is just eaiser.
Like i said
Re: '99 MJ Project - Possible Stroker Build - HELP
Posted: January 11th, 2010, 6:48 pm
by dwg86
go4lo wrote:gradon wrote:Someone posted a few weeks ago a link to the KB944s that could be had for ~$350, so search around here. I don't know if that included the rings.
Thanks for the tip! I found the old post. Looks like they've gone up slightly on their price but still not bad. $425.00 for a set of the KB944s and $65 for KTM Molly rings.
http://www.cnc-motorsports.com/product. ... 443&CtgID=
If I'm correct I should be able to order these, use my stock 4.0L rods, and a 4.2L crank?
No block or head shaving required?
Yep, their price has gone up. Still cheaper than summit or 505 performance.
Re: '99 MJ Project - Possible Stroker Build - HELP
Posted: January 11th, 2010, 7:06 pm
by go4lo
Plechtan wrote:Plechtan wrote:As far as your choice of parts, i would stick with the 4.0 rods and use the KB944 pistons. By the time you buy new rods, and get the pistons dished deeper, it is just eaiser.
Like i said
Opps.....sorry
Thanks for reposting. I'm still a newb to the stroker world so please forgive me.
Just for clarity sake, if I go with the KB944s I "should" be able to reuse my 4.0L rods and no dishing is required to these?
Re: '99 MJ Project - Possible Stroker Build - HELP
Posted: January 11th, 2010, 8:41 pm
by LetchcoreCJ7
go4lo wrote:Plechtan wrote:Plechtan wrote:As far as your choice of parts, i would stick with the 4.0 rods and use the KB944 pistons. By the time you buy new rods, and get the pistons dished deeper, it is just eaiser.
Like i said
Opps.....sorry
Thanks for reposting. I'm still a newb to the stroker world so please forgive me.
Just for clarity sake, if I go with the KB944s I "should" be able to reuse my 4.0L rods and no dishing is required to these?
Yes you use the 4.0l rods and they come with at decent 9.5 to 1 compression ratio. No need to dish them.