Newbies, and basic Stroker Recipes... Get started with your first stroker here!!
NvrGrwUp
Posts: 5 Joined: January 23rd, 2009, 4:04 pm
Post
by NvrGrwUp » February 8th, 2009, 5:16 pm
I just pulled an I6 out with the number of EF8933002665 BT on the divers side and 706M23 under 2 and 3 plugs.
Need a little help with the ID on this one
yuppiexj
Donator
Posts: 319 Joined: February 13th, 2008, 7:31 pm
Stroker Displacement: 4.5 needs assembly
Location: Fredercksburg VA (land of nothing)
Post
by yuppiexj » February 8th, 2009, 8:16 pm
That's a Renix
it was cast June 26, 1987
see here for more info
viewtopic.php?f=27&t=52
and
http://www.geocities.com/cantwait_forvi ... mbers.html
TurboTom wrote: i will eat my words later if need be.
TurboTom wrote:
Not sure of your rules...but you need to start with an engine that works best for the rules and cheat from there!
Proud owner of many stroker parts, that have not yet spontaneously assembled themselves.
NvrGrwUp
Posts: 5 Joined: January 23rd, 2009, 4:04 pm
Post
by NvrGrwUp » February 9th, 2009, 3:20 am
Thank you!
This is what I am going to build my stroker out of. Getting ready to tear this one down and see what is in side as long as there is nothing to bad it will see the doc.
Users browsing this forum: No registered users and 25 guests