Test Post

Test forum for testing stuff
Post Reply
User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1502
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Test Post

Post by Muad'Dib »

Testing a post
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!
yuppiexj
Donator
Donator
Posts: 319
Joined: February 13th, 2008, 7:31 pm
Stroker Displacement: 4.5 needs assembly
Location: Fredercksburg VA (land of nothing)

Re: Test Post

Post by yuppiexj »

and it showed up on the RSS too.
TurboTom wrote:i will eat my words later if need be.
TurboTom wrote: Not sure of your rules...but you need to start with an engine that works best for the rules and cheat from there!
Proud owner of many stroker parts, that have not yet spontaneously assembled themselves.
User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1502
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Test Post

Post by Muad'Dib »

Testing 1234
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!
yuppiexj
Donator
Donator
Posts: 319
Joined: February 13th, 2008, 7:31 pm
Stroker Displacement: 4.5 needs assembly
Location: Fredercksburg VA (land of nothing)

Re: Test Post

Post by yuppiexj »

and in the RSS feed to
TurboTom wrote:i will eat my words later if need be.
TurboTom wrote: Not sure of your rules...but you need to start with an engine that works best for the rules and cheat from there!
Proud owner of many stroker parts, that have not yet spontaneously assembled themselves.
User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1502
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Test Post

Post by Muad'Dib »

test
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!
User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1502
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Test Post

Post by Muad'Dib »

Test
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!
jbxx
Donator
Donator
Posts: 169
Joined: October 28th, 2009, 4:26 pm
Stroker Displacement: $.6 mistake?
Vehicle Year: 1986
Vehicle Make: Jeep
Vehicle Model: CJ7

Re: Test Post

Post by jbxx »

Image
DSCN0767 by jbxx, on Flickr
User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1502
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Test Post

Post by Muad'Dib »

TESTING
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!
User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1502
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Test Post

Post by Muad'Dib »

Test again
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!
User avatar
Muad'Dib
Site Admin / Owner
Site Admin / Owner
Posts: 1502
Joined: January 8th, 2008, 10:55 am
Stroker Displacement: 4.7L
Vehicle Year: 1990
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Bend, Oregon
Contact:

Re: Test Post

Post by Muad'Dib »

Test attach
You do not have the required permissions to view the files attached to this post.
If it feels right, then STROKE it!
You're lucky that hundred shot of CAPS LOCK didn't blow the welds on the forum!!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests