Here’s the two maybe three things.
1: This is a 96 4.0 (obd2) and had a manual trans.(will my Crank position sensor from the manual work on my 42re flex plate?
2: what torque converter do I choose. Bone stock amc 727 one for a 258? I would like a slight bump in performance in this purchase.
3: any advice on placement of the cps sensor on my bellhousing. Any pictures that one of you guys have where this has been done? Links ect?
I know I can cut a nice spot in the bell housing. What I don’t know is how close the cow needs to be to read the ring thingy.
I know Hesco made one for the crank separate of the trans but 359$
Any advice at all would be appreciated !