5.0L Clegg Stroker in my future... anyone else have one?

[Cheromaniac]

The longer stroke of the 4.6 makes it produce more torque, especially at lower rpm, but it also limits piston speed and probably won't tolerate as much boost as a 4.0.

[D'sJeepWrld]

The longer stroke of the 4.6 makes it produce more torque, especially at lower rpm, but it also limits piston speed and probably won't tolerate as much boost as a 4.0.

gotcha man thank your for the info !

[Hellfrekke80]

That looks like a pretty decent kit since it includes an Eagle 4.06" stroke crank, Scat forged rods, and custom forged pistons with a 9.5:1 CR.
The supplied 24lb injectors are probably too small given that this stroker has 300+hp potential.

https://www.cleggengine.com/jeep-stroke ... l-9-3-1c-r.html.html

I had similar thoughts. I'm considering 30-pound injectors.

[Brianj5600]

The longer stroke of the 4.6 makes it produce more torque, especially at lower rpm, but it also limits piston speed and probably won't tolerate as much boost as a 4.0.

What RPM is a 4.06" stroke limited to?

[Cheromaniac]

The longer stroke of the 4.6 makes it produce more torque, especially at lower rpm, but it also limits piston speed and probably won't tolerate as much boost as a 4.0.

What RPM is a 4.06" stroke limited to?

Since the bottom end is forged, I'd suggest no higher than 5900rpm.

[extremetownie]

I am running the 5.0 stroker . It is in a Ultra 4 stock class Jeep. I have had a lot of trouble with tuning mine. I gave up on a stock ecm modified tune and now have a terminator x . I am still having tuning issues. I am going to try a LS throttle body next. It runs good at full throttle, actually very impressive at full throttle, But you cant run full throttle all the time. I also added the roller rockers, but it still want rev over 7000.