4.0 w/ Fuel Pump On Rail - Primer Pump?

Swaping 258 to 4.0, 4.0 parts to 258 etc!
Post Reply
Neuner
Learning to use the board
Learning to use the board
Posts: 31
Joined: January 16th, 2015, 11:20 am
Vehicle Year: 1985
Vehicle Make: Jeep
Vehicle Model: CJ7

4.0 w/ Fuel Pump On Rail - Primer Pump?

Post by Neuner »

Been running with a 4.0 swap for about 6-7 years now. Used an e2000 high pressure pump with a pre-filter on the frame with no issues.

Recently had to drop the tank twice. With this last time, I've not been able to get it to properly syphon fuel to the e2000. I'm also worried for the day I ever run out of gas and not able to start it again without crawling underneath.

Anyone use a low-pressure primer fuel pump in front of the high-pressure unit to help syphon fuel? If so, how well does it work and which one did you use?
Things you own, begin owning you.
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests