Stroker vs V8 swap

Newbies, and basic Stroker Recipes... Get started with your first stroker here!!
Post Reply
Andre_ITALY
Learning to use the board
Learning to use the board
Posts: 36
Joined: January 7th, 2016, 9:31 am
Vehicle Year: 1997
Vehicle Make: Jeep
Vehicle Model: TJ 4.0
Location: Bologna, ITALY

Stroker vs V8 swap

Post by Andre_ITALY »

Hi everybody!
I planning to modify my 1997 TJ 4.0 m/t, and i need to understand the "stroker result" VS V8 swap. :huh:

V8 for comparison:

1997-98 ZJ 318 (5.2)
1998 ZJ 360 (5.9)
1999-2004 WJ 4.7
2002-2004 WJ 4.7 HO

Exaple: For a stroker with similar/little bit superior performance of ZJ 318, what should I do? Budget for this Stroker ?


Thanks a lot! :cheers: :banana:
TJryder
Making Progress
Making Progress
Posts: 86
Joined: July 29th, 2018, 1:03 pm
Stroker Displacement: 4.6
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: TJ

Re: Stroker vs V8 swap

Post by TJryder »

Stroker all day long. Omho.

Unless you put in SBC stroker with 350+ HP.

And paperwork here in EU will kill you. With stroker you will be street legal.
°O|||||||O°
lazyxj
Donator
Donator
Posts: 25
Joined: April 28th, 2017, 10:24 pm
Stroker Displacement: 4.6
Vehicle Year: 2001
Vehicle Make: Jeep
Vehicle Model: XJ

Re: Stroker vs V8 swap

Post by lazyxj »

TJryder wrote: January 25th, 2019, 1:12 pm Stroker all day long. Omho.
And paperwork here in EU will kill you. With stroker you will be street legal.
The paper work here in California can kill you too.
While you can get more horsepower out of a V8, the hassle involved isn't worth it, IMO.
Installing a stroker is a weekend job with a friend's help, a V8 conversion can take months and a lot of visits from the UPS man.
Check Novac's site for their V8 XJ conversions to get an idea of what needs to be switched and decide if you are up for the challenge.
It's tempting and I gave it some thought.
https://www.novak-adapt.com
A stroker is visually the same as a stock 4.0. The only big differences is the exhaust and throttle bodies, assuming you will install headers and a bigger throttle body. I doubt if any inspector is sharp enough to spot a bigger throttle body and the Banks header isn't very noticeable and it has a CARB registration number, meaning it's street legal in California. The EU may accept CARB's stringent standards.
With a stroker, you wouldn't have to import as many parts. Once done, since you still have a Jeep engine, availability to normal repair parts remains the same.
The number one advantage of a stoker, if you live in an emission's control region, is the lack of paper work, since it's the same engine, literally if you rebuild your existing engine.
With the right cam and injectors, it will pass a tail pipe test. My 2001 stroker passes the ECM's internal checks, meaning the emissions are low enough that the computer is happy and it will pass an emissions tests, as long as it also passes the visual inspection.
Being an air breathing creature, I have no issues with the emission requirements.
User avatar
Cheromaniac
I live here
I live here
Posts: 3180
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: Stroker vs V8 swap

Post by Cheromaniac »

Andre, none of the V8 engines you mentioned produce enough power in stock form to make them better than a 4.6L stroker build. The only V8 swap even remotely worth doing is the Chevy LS series, but that's a non-starter with you living in Italy.
I suggest you contact Russ Pottenger so he can put together a parts list for you to do a stroker build. Then you can have everything shipped together in one big box, and that'll cost a lot less than shipping individual parts in smaller boxes. You may want to read about my own stroker build (link in sig) to get a better idea of what's involved.
It's probably a good idea to find a decent junkyard 4.0L engine to use for the stroker build and have that ready to swap into your Jeep. This will minimize downtime and you can keep your old 4.0L engine as a spare.
1992 XJ 4.6 I6 - 5MT - Stroker build-up, Stroker "recipes" Sold
1995 Mustang GT - 4AT - Modded Sold
2006 Mustang GT - 5MT - Modded Midlife Crisis Car :mrgreen:
Andre_ITALY
Learning to use the board
Learning to use the board
Posts: 36
Joined: January 7th, 2016, 9:31 am
Vehicle Year: 1997
Vehicle Make: Jeep
Vehicle Model: TJ 4.0
Location: Bologna, ITALY

Re: Stroker vs V8 swap

Post by Andre_ITALY »

Sorry! I did not explain well. :worship: :doh:

I know the legal advantages of a stroker vs v8 swap. A Stroker will be my way I'm not planning a v8 swap :nono: .
My jeep is like a DD, not a "trailer queen".
Here in Italy, if you want a "faster but cheaper" TJ, put a 5.2-5.9 (ZJ)or 4.7 (WJ) because is easy to find a donor for less than 1000 (and all parts from USA, will cost x2, for shipping and tax).
My question was about the performance result vs budget because a Stroker is like a custom dress, the budget is very variable from "4.6 poor man's" stroker to a 5.0L "very high-buck stroker".
http://www.jeep4.0performance.4mg.com/stroker.html
example:
A TJ with a 4.6L "poor man's" stroker VS a TJ with a 5.9 zj result faster on 0-60 mph and 1/4 mile? And for offroad use/rock crawling, torque curve, throttle response, and rev fast is batter on 4.6L "poor man's" stroker? Or need more budget for my goal.

thank you so much! :worship: :worship: :cheers: :cheers: :cheers: :cheers:
User avatar
Cheromaniac
I live here
I live here
Posts: 3180
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: Stroker vs V8 swap

Post by Cheromaniac »

If you're on a limited budget, do the modified poor man's stroker. At 245hp/315lbft (with CAI, 62mm TB, header, 2.5" exhaust), it'll have all the power you'll need to have fun in your TJ.
TJryder
Making Progress
Making Progress
Posts: 86
Joined: July 29th, 2018, 1:03 pm
Stroker Displacement: 4.6
Vehicle Year: 2000
Vehicle Make: Jeep
Vehicle Model: TJ

Re: Stroker vs V8 swap

Post by TJryder »

Hi Andre,

Donors do come cheap - but questionable.

Most ov them spend their last hours as bashers and people do god knows what to them.

Do not be fooled that a donnor engine will be without issues or without need for rebuild.

I have put some classic and toy cars through my hands in my life. The cheapest option always ends up to be the most expensive in the end.

Contact Russ for your parts, find a donor TJ engine, build it, swap it and sell the fully running 4.0 for a reasonable price.

IMHO that is the cheapest way, total budget with deducrion of running engine will be arround 2.500€.

That is for nicelly built, street legal, reliable, almost standard rig @260-270hp.

Which adds to resale value in Europe, the V8 swap will reduce your resale value...

BR M
°O|||||||O°
User avatar
Cheromaniac
I live here
I live here
Posts: 3180
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: Stroker vs V8 swap

Post by Cheromaniac »

Not to mention that if you have a big displacement engine with high CO2 emissions, you're likely to be clobbered in Europe with high annual vehicle licence charges. Ask me how I know!
Andre_ITALY
Learning to use the board
Learning to use the board
Posts: 36
Joined: January 7th, 2016, 9:31 am
Vehicle Year: 1997
Vehicle Make: Jeep
Vehicle Model: TJ 4.0
Location: Bologna, ITALY

Re: Stroker vs V8 swap

Post by Andre_ITALY »

Cheromaniac wrote: February 2nd, 2019, 1:26 am If you're on a limited budget, do the modified poor man's stroker. At 245hp/315lbft (with CAI, 62mm TB, header, 2.5" exhaust), it'll have all the power you'll need to have fun in your TJ.
CAI? what is it? :huh:

Actualy i have a 62mm TB ( BBK), 505 performance SS fully ported header , Magnaflow catalytic converter, borla 2.5" catback and BMC CDA airfilfer(w/safari snorkel)
User avatar
SkylinesSuck
Donator
Donator
Posts: 545
Joined: February 14th, 2009, 11:11 pm
Stroker Displacement: 4.6L
Vehicle Year: 1998
Vehicle Make: Jeep
Vehicle Model: Wrangler
Location: Northern VA

Re: Stroker vs V8 swap

Post by SkylinesSuck »

Cold Air Intake
User avatar
Cheromaniac
I live here
I live here
Posts: 3180
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: Stroker vs V8 swap

Post by Cheromaniac »

Andre_ITALY wrote: February 4th, 2019, 2:38 amCAI? what is it? :huh:

Actualy i have a 62mm TB ( BBK), 505 performance SS fully ported header , Magnaflow catalytic converter, borla 2.5" catback and BMC CDA airfilfer(w/safari snorkel)
CAI = Cold Air Intake. Many are advertised as cold air intakes but because they have filters that are exposed in the engine compartment, they actually function as hot air intakes. The best ones have large diameter tubing, a big conical filter (S&B are the best), and a heatshield that isolates the filter from hot underhood air.

Looks like you already have the external bolt-ons required to take advantage of a stroker build.
If you decide to proceed with the modified poor man's stroker (specs below), the list of non-OEM parts you'll need to ship from overseas will be very short.

4.6L Modified "poor man's" stroker

Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
Custom forged +0.020" bore pistons, compression height 1.380", dish volume 26cc
9.25:1 CR
Stock 4.0 camshaft
DIY ported HO 1.91"/1.50" 57cc cylinder head
Mopar/Victor 0.043" head gasket
0.043" quench height
Bosch 0280155703 injectors for '96-'04 engines
245hp @ 4700rpm, 315lbft @ 3000rpm ('96-'04 camshaft)
Andre_ITALY
Learning to use the board
Learning to use the board
Posts: 36
Joined: January 7th, 2016, 9:31 am
Vehicle Year: 1997
Vehicle Make: Jeep
Vehicle Model: TJ 4.0
Location: Bologna, ITALY

Re: Stroker vs V8 swap

Post by Andre_ITALY »

Cheromaniac wrote: February 4th, 2019, 9:53 am
4.6L Modified "poor man's" stroker

Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
Custom forged +0.020" bore pistons, compression height 1.380", dish volume 26cc
9.25:1 CR
Stock 4.0 camshaft
DIY ported HO 1.91"/1.50" 57cc cylinder head
Mopar/Victor 0.043" head gasket
0.043" quench height
Bosch 0280155703 injectors for '96-'04 engines
245hp @ 4700rpm, 315lbft @ 3000rpm ('96-'04 camshaft)
What effects will it have on torque, power and mpg this stuff? :?: (My 1997 Tj run 4.88 and 35"x12.50r15 BFG)
- Russ Ported HO 2.00"/1.55" 62cc cylinder head vs DIY ported HO 1.91"/1.50" 57cc cylinder head
- A camshaft like a compcams 68-232-4 (or Russ custom) vs 96-'04 camshaft
- 99&UP intake manifold vs 1997 manifold?
- 70mm TB instead of my 62mm TB?
- higher CR?
- 4CW vs 12CW crankshaft?

Remember this: european unleaded fuel type in 95 RON (standard) or 100 RON (Premium).
For conversion in US system : http://www.pencilgeek.org/2009/05/octan ... sions.html



:cheers:
User avatar
Cheromaniac
I live here
I live here
Posts: 3180
Joined: March 8th, 2008, 12:58 pm
Stroker Displacement: 4563cc
Vehicle Year: 1992
Vehicle Make: Jeep
Vehicle Model: Cherokee
Location: Cyprus
Contact:

Re: Stroker vs V8 swap

Post by Cheromaniac »

Your engine will make more power and torque with Russ' ported head, Russ' custom 68-232-4 cam, a 70mm TB, and a higher CR. It'll be close to this:

4.6L low-buck stroker

Jeep 4.2L 3.895" stroke crank
Jeep 4.0L 6.125" rods
Custom forged +0.030" bore pistons, compression height 1.380", dish volume 18cc
9.6:1 CR
CompCams 68-231-4 206/214 degree camshaft
Russ Pottenger ported HO 2.00"/1.55" 62cc cylinder head
Mopar/Victor 0.043" head gasket
0.043" quench height
Ford 24lb/hr injectors for '96-'04 engines
268hp @ 4900rpm, 326lbft @ 3500rpm
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 7 guests